|
1kV-80kV, 330W/400WSeries OL330 & OL400 |
 |
| The Series
OL330 & Series OL400 incorporate the
latest switch mode technology to achieve
high performance and excellent reliability
within a compact, lightweight assembly.
The new design utilizes high frequency,
MOSFET switching techniques, incorporating
low RDS (ON) MOSFETS switched at 50kHz,
combined with non-dissipative snubbing to
achieve a high power to volume ratio. This
results in cooler operation and thus increased
reliability. These power supplies are intended
to be designed into customer's equipment
as a component.
To learn more Click
Here |
|
|
|
1kV-60kV, 1kWSeries OL1K |
 |
|
The Series OL1K incorporates the latest switch-mode technology to achieve a high performance and
excellent reliability within a compact and lightweight assembly. The design utilises high frequency,
IGBT switching techniques, incorporating third generation IGBTs switched at 35kHz, to achieve a high
power to volume ratio. This results in cooler operation and thus increased reliability.
To learn more Click
Here |
|
|
1kV-80kV, 3kWSeries OL3000 |
| |
|
60kV-200kV, 6kWSeries OL6000 |
 |
|
The Series OL6000 answers industry
demands for high reliability, high
voltage sources designed to meet the
rigorous requirements of ion and electron
beam systems within a compact assembly,
at affordable prices. The Series OL6000
supply 6kW of output power. The system
consists of two units: the converter,
housed in a 4U 19" rack mounting
unit and the HV unit, which is a separate
high voltage multiplier assembly.
To learn more Click
Here |
|
|
|
80kV-200kV, 8kW Series OL8000
|
|
The Series OL8000 answer industry demands for high reliability, high voltage sources designed to meet the rigorous requirements of ion and electron beam systems within a compact assembly, at affordable prices. The Series OL8000 supply 8kW of output power. The system consists of two units: the converter, housed in a 4U 19" rack mounting unit and the HV unit, which is a separate high voltage multiplier assembly.
To learn more Click Here |
|
| 60kV-200kV, 10kWSeries OL10K |
 |
The Series OL10K is a range of high reliability products designed to meet the rigorous requirements of Ion and electron beam systems. These high performance switch mode systems are based on a power converter using zero-volt switching. A full bridge of the latest generation of Insulated Gate Bipolar Transistors (IGBT’s) in a fully regulated close-loop system capable of continuously supplying up to 10kW of output power whilst maintaining flexible control down to a few hundred watts. These highly reliable rugged systems comprise two units, a rack mounting or free standing, power converter through which remote controls are facilitated and a separate HV unit employing a modular disc construction.
To learn more Click Here
|
|
|
|
| 60kV-200kV, 20kWSeries OL20K |
 |
|
The Series OL20K answers the industry
demands for high reliability. high
voltage sources designed to meet the
rigorous requirements of ion and electron
beam systems within a compact assembly.
The Series OL20K supply has 20kW of
output power. The system consists
of two units: the converter, housed
in a 6U 19” rack mounting unit
and the HV unit, which is a separate
high voltage multiplier assembly.
The system is intended to be designed
into customer's equipment as a component.
To learn more Click
Here |
|
|
|
| |
Series
OL330 & OL400
DESCRIPTION
The Series OL330 & Series OL400 incorporate
the latest switch mode technology to achieve high performance
and excellent reliability within a compact, lightweight assembly.
The new design utilizes high frequency, MOSFET switching techniques,
incorporating low RDS (ON) MOSFETS switched at 50kHz, combined
with non-dissipative snubbing to achieve a high power to volume
ratio. This results in cooler operation and thus increased
reliability. These power supplies are intended to be designed
into customer's equipment as a component.
| Features |
Application |
- 330W or 400W output power
- Range of output voltages from 1kV
to 80kV
- Positive or negative polarity
- Digital or analogue meter options
- OEM version available
- Air insulated (up to 60kV) or encapsulated
high voltage assembly
- Compact size (2U x 429 wide x 419
deep)
- Lightweight – only 6.5kg (air
insulated HV assembly)
- High frequency switch mode MOSFET
technology
- Protection against output short circuits
and over-temperature
- Local or remote operation (except
‘B’ version)
- CE Marked for the Low Voltage Directive,
73/23/EEC
|
- X-ray equipment
- Ion implantation
- Cable testing
- TWT Helix supplies
- Multi-CRT video displays
- Electron beam welding
- Component power supply for system
integration
|
If you do not have Acrobat Reader installed
on your machine click
here to download your copy.
E-mail: sales.us@HiTekp.com
^ Top
Series
OL1K
DESCRIPTION
The Series OL1K incorporates the latest switch-mode technology to achieve a high performance and excellent reliability within a compact and lightweight assembly. The design utilises high frequency,
IGBT switching techniques, incorporating third generation IGBTs switched at 35kHz, to achieve a high power to volume ratio. This results in cooler operation and thus increased reliability.
| Features |
Application |
- 1000W
- Range of output voltages from 1kV
to 60kV
- Positive or negative polarity
- Digital or analogue meter options
- OEM version available
- Air insulated (up to 60kV) or encapsulated
high voltage assembly
- High frequency switch mode IGBT technology
- Protection against output short circuits
and over-temperature
- Local or remote operation (except
'B' version)
- Designed to satisfy the requirements
of EN60950 for safety
- CE Marked for the Low Voltage Directive,
73/23/EEC
|
- X-ray equipment
- Ion implantation
- Cable testing
- TWT Helix supplies
- Multi-CRT video displays
- Electron beam welding
- Component power supply for system
integration
|
If you do not have Acrobat Reader installed
on your machine click
here to download your copy.
E-mail: sales.us@HiTekp.com
^ Top
Series
OL6000
DESCRIPTION
The Series OL6000 answer industry demands for
high reliability, high voltage sources designed to meet the
rigorous requirements of ion and electron beam systems within
a compact assembly, at affordable prices. The Series OL6000
supply 6kW of output power. The system consists of two units:
the converter, housed in a 4U 19" rack mounting unit
and the HV unit, which is a separate high voltage multiplier
assembly.
| Features |
Application |
- 6kW output power
- Range of output voltages available
from 60kV to 200kV
- Outputs variable from zero to rated
voltage
- Positive or negative polarity
- Robust IGBT converter design
- High frequency operation for minimum
stored energy
- High stability
- High efficiency
- High power density
- High reliability
- Low ripple
- Local or remote operation
- Arc and short circuit protected
- Constant voltage and constant current
control
- Proprietary modular high voltage unit
- CE Marked for the Low Voltage Directive,
73/23/EEC
- Custom user interface design available
|
- Ion implantation
- Ion vapor deposition
- Chemical vapor deposition
- Electron beam welding
- Electron guns
- High voltage testing
- Particle accelerators
|
If you do not have Acrobat Reader installed
on your machine click
here to download your copy.
E-mail: sales.us@HiTekp.com
^ Top
Series
OL8000
DESCRIPTION
The Series OL8000 answer industry demands for
high reliability, high voltage sources designed to meet the
rigorous requirements of ion and electron beam systems within
a compact assembly, at affordable prices. The Series OL8000
supply 8kW of output power. The system consists of two units:
the converter, housed in a 4U 19" rack mounting unit
and the HV unit, which is a separate high voltage multiplier
assembly
| Features |
Application |
- 8kW output power
- Range of output voltages available
from 60kV to 200kV
- Outputs variable from zero to rated
voltage
- Positive or negative polarity
- Robust IGBT converter design
- High frequency operation for minimum
stored energy
- High stability
- High efficiency
- High power density
- High reliability
- Low ripple
- Local or remote operation
- Arc and short circuit protected
- Constant voltage and constant current
control
- Proprietary modular high voltage unit
- CE Marked for the Low Voltage Directive,
73/23/EEC
- Custom user interface design available
|
- Ion implantation
- Ion vapor deposition
- Chemical vapor deposition
- Electron beam welding
- Electron guns
- High voltage testing
- Particle accelerators
|
If you do not have Acrobat Reader installed
on your machine click
here to download your copy.
E-mail: sales.us@HiTekp.com
^ Top
Series OL10K
DESCRIPTION
The Series OL10K is a range of high reliability products designed to meet the rigorous requirements of Ion
and electron beam systems. These high performance switch mode systems are based on a power
converter using zero-volt switching. A full bridge of the latest generation of Insulated Gate Bipolar
Transistors (IGBT’s) in a fully regulated close-loop system capable of continuously supplying up to 10kW
of output power whilst maintaining flexible control down to a few hundred watts. These highly reliable
rugged systems comprise two units, a rack mounting or free standing, power converter through which
remote controls are facilitated and a separate HV unit employing a modular disc construction.
| Features |
Application |
- 10kW of output power
- Output voltages from 60kV to 200kV
- Positive or negative polarity to order
- Robust IGBT converter design
- Exceptional reliability
- High stability
- Excellent inherent ruggedness
- Arc count and Extinguish (ACE)
- CE Marked
|
- Ion implantation
- Electron beam welding
- Ion vapour deposition
- Particle physics applications
- Inductive output tubes
- Electron beam curing
- Surface modification
|
If you do not have Acrobat Reader installed on your machine click here to download your copy.
E-mail: sales.us@HiTekp.com
^ Top
Series
OL20K
DESCRIPTION
The Series OL20K answers the industry
demands for high reliability. high voltage sources designed
to meet the rigorous requirements of ion and electron beam
systems within a compact assembly. The Series OL20K supply
has 20kW of output power. The system consists of two units:
the converter, housed in a 6U 19” rack mounting unit
and the HV unit, which is a separate high voltage multiplier
assembly. The system is intended to be designed into customer's
equipment as a component.
| Features |
Application |
- Up to 20kW of output power
- Rated output voltage up to 200kV
- Outputs variable from zero to rated
voltage
- Positive and negative polarity
- Robust IGBT converter design
- High frequency operation for minimum
stored energy
- High stability
- High efficiency
- High power density
- High reliability
- Low ripple
- Local or remote operation
- Arc and short circuit protected current
control
- Proprietary modular high voltage unit
- CE Marked for the Low Voltage Directive,
73/23/EEC
- Custom user interface design available
|
- Ion implantation
- Ion vapor deposition
- Chemical vapor deposition
- Electron beam welding
- Electron guns
- High voltage testing
- Particle accelerators
|
If you do not have Acrobat Reader installed
on your machine click
here to download your copy.
E-mail: sales.us@HiTekp.com
^ Top
|
|
