|
Cap Charger 1000
|
 |
| The Series
CC1000 is a range of high performance, high
reliability capacitor charger power supplies
intended for use as a component power supply
in medical environments. It features high
frequency switching techniques to combine
a power factor corrector and resonant converter
in a compact unit. The CC1000 has been designed
to allow customization to suit specific
OEM applications.
To learn more Click
Here |
|
|
|
Simmer SM10
|
 |
| SM10 The
SM10 simmer module has been designed as
a component power supply to meet the needs
of flash lamps used to plug YAG lasers.
Powered from a 24V DC supply, this compact
device will provide 100mA simmer current
at 100V. The SM10 incorporates a trigger
pulse output to drive an external trigger
transformer. Custom version are available
on request and can be integrated into a
dedicated flash lamp driver unit.
To learn more Click
Here |
|
|
|
HTR20006
|
 |
| The HiTek
Power HTR20006-030 is a switched mode rectifier
that is capable of providing 2800 Watts
output power. Designed to meet the stringent
requirements of telecoms applications the
rectifier is equally at home in professional
applications requiring high quality DC power
such as Laser RF Generators. This rectifier
is intended for use as a component power
supply in a system.
To learn more Click
Here |
|
|
|
Lamp Diode Driver 500
|
 |
| DESCRIPTION
PFC Power Factor Correctors
The PFC power factor corrector modules are
designed to be used as a supply for DC/DC
converters with 500W or 1000W of output
power from a 100V AC input. The PFC is an
active filter, suppressing spikes on the
input current and behaves like a pure ohmic
load on mains. The wide input range (100-240V
AC) allows international installation without
further adjustments and the modules output
is 360V DC. The device is designed following
EN 61000-3-2. Both PFCs endure a test voltage
of 3kV between mains input and ground for
at least one minute. The insulation resistance
exceeds 100 mOhm and the input filters are
designed to fulfill the requirements of
IEC 601.
DESCRIPTION
HCS High Current Sources
The HCS series is a family of DC/DC converters
ranging from 200W into the kW power range
comprising unique protection features and
are specifically designed to drive valuable
laser diodes. The diode drivers are designed
as a closed loop controlled current source
for stacked high power laser diodes. The
internal controller is made to meet the
characteristics of non-linear loads. As
a feed back signal either output current
or an external signal as e.g. laser diode
output power may be used. The unique design
of the power supplies features closed loop
power modulation with frequencies in the
kHz range. Control electronics are insulated
from power circuits - enabling the stacking
of several HCS modules. These power supplies
comprise safety relevant features as monitoring
of input current and voltage, board temperature
including safety shut down. The devices
offer minimized electro-magnetic radiation
(EMI) and because of a high overall efficiency
due to full-bridge topology with zero voltage
switching (ZVS), convectional cooling is
sufficient to take the dissipated heat out
of the heat sink.
To learn more Click
Here |
|
|
| Flash Lamp Driver |
 |
HiTek Power has recognized that in today’s manufacturing world that
many system assemblers are moving towards high level integration of
their products. In response we have developed the capability to integrate
the capacitor charger, capacitors, simmer and trigger components into a
custom OEM package to suit the exact requirements of our customers.
Using IGBT technology, we are able to provide accurate and repeatable
pulses to the flashlamps with the ability to vary the pulse energy.
To learn more Click Here |
|
|
CC1000
DESCRIPTION
The Series CC1000 is a range of high performance,
high reliability capacitor charger power supplies intended
for use as a component power supply in medical environments.
It features high frequency switching techniques to combine
a power factor corrector and resonant converter in a compact
unit. The CC1000 has been designed to allow customization
to suit specific OEM applications.
| Features |
Applications |
- Incorporates high efficiency zero
current and voltage switching techniques
- Power factor correction
- Positive and negative voltage versions
available
- Excellent pulse to pulse repeatability
characteristics
- Flexible design to permit customer
variants
- Compact size
- Low weight
- CE marked for Low Voltage Directive,
73/23/EEC
|
- Industrial laser systems
- Non contact medical environments
- Capacitor charging circuits
- Nd:YAG & Er:YAG Lasers
|
If you do not have Acrobat Reader installed
on your machine click
here to download your copy.
E-mail: sales.us@HiTekp.com
^ Top
SM10
DESCRIPTION
The SM10 simmer module has been designed
as a component power supply to meet the needs of flash lamps
used to plug YAG lasers. Powered from a 24V DC supply, this
compact device will provide 100mA simmer current at 100V.
The SM10 incorporates a trigger pulse output to drive an external
trigger transformer. Custom version are available on request
and can be integrated into a dedicated flash lamp driver unit.
| Features |
Applications |
- Incorporates high efficiency zero
current and voltage switching techniques
- Power factor correction
- Positive and negative voltage versions
available
- Excellent pulse to pulse repeatability
characteristics
- Flexible design to permit customer
variants
- Compact size
- Low weight
- CE marked for Low Voltage Directive,
73/23/EEC
|
- Industrial laser systems
- Non contact medical environments
- Capacitor charging circuits
- Nd:YAG & Er:YAG Lasers
|
If you do not have Acrobat Reader installed
on your machine click
here to download your copy.
E-mail: sales.us@HiTekp.com
^ Top
HTR20006
DESCRIPTION
The HiTek Power HTR20006-030 is a switched mode
rectifier that is capable of providing 2800 Watts output power.
Designed to meet the stringent requirements of telecoms applications
the rectifier is equally at home in professional applications
requiring high quality DC power such as Laser RF Generators.
This rectifier is intended for use as a component power supply
in a system.
SWITCH MODE
RECTIFIER 2800 WATTS
| Features |
Applications |
- 2.8kW Output power
- 30VDC Nominal DC O/P
- Power Factor Correction
- 184 – 264VAC Input voltage
- High power density
- Fan cooled
- Active or droop current sharing
- Front panel indicators
- Over voltage protection
- Complies with European EMC, Safety
and Environmental Standards
|
- Telecom power
- Modular power system
- CO2 Laser systems
- ATE
|
If you do not have Acrobat Reader installed
on your machine click
here to download your copy.
E-mail: sales.us@HiTekp.com
^ Top
Series
CC2500
DESCRIPTION
The Series CC2500 is a range of high performance,
high reliability capacitor charging power supplies intended
for use as a component power supply in medical and industrial
environments. It features high frequency switching techniques
to combine a power factor corrector and resonant converter
in a compact unit.
| Features |
Applications |
- Incorporates high efficiency zero
current and voltage switching techniques
- Power factor correction
- Positive and negative versions available
- Excellent pulse to pulse repeatability
characteristics
- Flexible design to permit customer
variants
- Compact size
- Low weight
- CE Marked
|
- Industrial laser systems
- Non-contact medical environments
- Capacitor charging circuits
- Pulsed power applications
|
If you do not have Acrobat Reader installed
on your machine click
here to download your copy.
E-mail: sales.us@HiTekp.com
^ Top
Series
LDD 500
PFC Power Factor Correctors
The PFC power factor corrector modules are designed to be
used as a supply for DC/DC converters with 500W or 1000W of
output power from a 100V AC input. The PFC is an active filter,
suppressing spikes on the input current and behaves like a
pure ohmic load on mains. The wide input range (100-240V AC)
allows international installation without further adjustments
and the modules output is 360V DC. The device is designed
following EN 61000-3-2. Both PFCs endure a test voltage of
3kV between mains input and ground for at least one minute.
The insulation resistance exceeds 100 mOhm and the input filters
are designed to fulfill the requirements of IEC 601.
HCS High Current Sources
The HCS series is a family of DC/DC converters ranging from
200W into the kW power range comprising unique protection
features and are specifically designed to drive valuable laser
diodes. The diode drivers are designed as a closed loop controlled
current source for stacked high power laser diodes. The internal
controller is made to meet the characteristics of non-linear
loads. As a feed back signal either output current or an external
signal as e.g. laser diode output power may be used. The unique
design of the power supplies features closed loop power modulation
with frequencies in the kHz range. Control electronics are
insulated from power circuits - enabling the stacking of several
HCS modules. These power supplies comprise safety relevant
features as monitoring of input current and voltage, board
temperature including safety shut down. The devices offer
minimized electro-magnetic radiation (EMI) and because of
a high overall efficiency due to full-bridge topology with
zero voltage switching (ZVS), convectional cooling is sufficient
to take the dissipated heat out of the heat sink.
LASER DIODE
DRIVER MODULES
| Features |
Applications |
- Modular construction
- High power/volume ratio
- Laser protection built in
- Flexible design
- Medical approval
- CE Marked
|
- Operating high power diode laser devices
for material machining and pumping Nd: YAG-laser devices
- For any laser machining methods with
high time resolution
|
If you do not have Acrobat Reader installed
on your machine click
here to download your copy.
E-mail: sales.us@HiTekp.com
^ Top
Flash Lamp Driver Units
DESCRIPTION
HiTek Power has recognized that in today’s manufacturing world that
many system assemblers are moving towards high level integration of
their products. In response we have developed the capability to integrate
the capacitor charger, capacitors, simmer and trigger components into a
custom OEM package to suit the exact requirements of our customers.
Using IGBT technology, we are able to provide accurate and repeatable
pulses to the flashlamps with the ability to vary the pulse energy.
| Features |
Applications |
- Fully integrated
- Variable pulse control
- Simmer facilities
- Custom solutions
- Medical capability
- CE marked
|
- Flashlamp pumped lasers
- Intense pulsed light systems
|
If you do not have Acrobat Reader installed
on your machine click
here to download your copy.
E-mail: sales.us@HiTekp.com
^ Top
|
