Photo Multiplier Power Supplies

0 to -1250VDCSeries B

The Series-B is intended for installation as a component power supply with both Side and Front Window Photomultipliers. These high quality, compact devices can be mounted directly to PMT’s such as the 931A and IP28. They are small, low cost solid state power supplies capable of providing 0 to -1 250V DC. The output voltage is proportional to the input voltage. Intended for 28mm diameter, 9-stage PMT’s the Series-B contains an integral voltage divider of approximately 5Mohm with no by-pass capacitor. To learn more Click Here

-500 to -1250VDCSeries C

The Series-C is intended for installation as a component power supply with Side and Front Window Photomultipliers. These high quality, compact devices can be mounted directly to PMT’s such as the 931A and IP28. They are small, low cost solid state power supplies capable of providing -500 to -1 250V DC. The output voltage is controlled by a programming resistance or voltage. Intended for 28mm diameter, 9-stage PMT’s the Series-C contains an integral divider of approximately 5Mohm with no bypass capacitor. To learn more Click Here

1.1kV or 1kV-1.4kV, 1W or 3W Series PPM

These new compact, high performance photomultiplier power supply modules have considerable advantages in size, weight and specification over other competitive units for PM applications and for those where 3W (PPM3/102) or 1W (PPM1/112) output power is sufficient and high performance essential. To learn more Click Here

500-1.5kV, 4WPMM4

The Series PMM4 is a range of versatile high voltage modules which have extremely low output ripple, and are directly compatible with industry standard PMT supplies. Available with +24V DC or ±15V DC input, these units allow control of the output voltage by voltage or potentiometer. Output voltage monitoring is also provided. To learn more Click Here

PM10                                                                                                                 10W

The Series PM10 is a range of versatile high voltage component photomultiplier modules equally suited to laboratory and development work and for specification in OEM equipment. Powered from 24V DC, these units allow full range control and monitoring of voltage and current via 0-10V analog signals. To learn more Click Here

DESCRIPTION

The Series-B is intended for installation as a component power supply with both Side and Front Window Photomultipliers. These high quality, compact devices can be mounted directly to PMT’s such as the 931A and IP28. They are small, low cost solid state power supplies capable of providing 0 to -1250V DC. The output voltage is proportional to the input voltage. Intended for 28mm diameter, 9-stage PMT’s the Series-B contains an integral voltage divider of approximately 5Mohm with no by-pass capacitor.

If you do not have Acrobat Reader installed on your machine click here to download your copy.

E-mail: sales.us@HiTekp.com

^ Top

Series C

The Series-C is intended for installation as a component power supply with Side and Front Window Photomultipliers. These high quality, compact devices can be mounted directly to PMT’s such as the 931A and IP28. They are small, low cost solid state power supplies capable of providing -500 to -1250V DC. The output voltage is controlled by a programming resistance or voltage. Intended for 28mm diameter, 9-stage PMT’s the Series-C contains an integral divider of approximately 5Mohm with no bypass capacitor.

If you do not have Acrobat Reader installed on your machine click here to download your copy.

E-mail: sales.us@HiTekp.com

^ Top

Series PPM

Description:

These new compact, high performance photomultiplier power supply modules have considerable advantages in size, weight and specification over other competitive units for PM applications and for those where 3W (PPM3/102) or 1W (PPM1/112) output power is sufficient and high performance essential.

The PPM3/102 is a very high performance photomultiplier power supply module designed for more general use in a variety of applications requiring 3W output power. Line, load and ripple performance, together with many other aspects of the specification, are all you would expect from this professional photomultiplier power supply module. The low case profile, small size, weight, price and ex stock delivery make this unit an ideal component.

The PPM3/142 is identical to the PPM3/102 except that output is variable up to 1.4kV, 2mA.

The PPM1/112 is a directly compatible plug-in alternative to the Hamamatsu model C1309-04 and therefore a specialized model. With an output to -1.1kV at 0.7mA, the control characteristics are a close match to those of the Hamamatsu C1309-04, with the added advantage of a wider supply voltage range; the Power Input Pins 1 & 2 can be joined together for operation from a single external supply of +14V to +23V.

All three models are configured for direct PCB mounting. The low case profile and small size make these models ideal for ‘designing in’ to equipment as components. Tapped holes and screws are provided for fixing and are at each corner of the underside of the units. The cast aluminum alloy case, finished in semi-matt black paint, allows good heat dissipation and screening is provided by an alloy base plate. Each unit has its own serial number, providing manufacturing date traceability, together with pin connections.

Features

Applications

Small size, lightweight High performance for precision applications Plug-in for circuit board mounting Fast slew rate Either polarity available on PPM3 EMC screened construction DC 0-10V programming signal on PPM3 High reliability Short circuit & overload proof Low cost CE Marked

Photomultipliers (for all purposes) Precision electrostatic lenses beam positioning controls Spectroscopy Image intensifiers Microchannel plates High voltage function generators (PPM3) Precision uses in general To view the entire brochure for the PPM 1/112 series, click here To view the entire brochure for the PPM 3/102 series, click here To view the entire brochure for the PPM 3/142 series, click here To view the entire brochure for the PPM 3/152 series, click here

If you do not have Acrobat Reader installed on your machine click here to download your copy.

E-mail: sales.us@HiTekp.com

^ Top

Series PMM4

DESCRIPTION

The Series PMM4 is a range of versatile high voltage modules which have extremely low output ripple, and are directly compatible with industry standard PMT supplies. Available with +24V DC or ±15V DC input, these units allow control of the output voltage by voltage or potentiometer. Output voltage monitoring is also provided.

If you do not have Acrobat Reader installed on your machine click here to download your copy.

E-mail: sales.us@HiTekp.com

^ Top

Series PM10

The Series PM10 is a range of versatile high voltage component photomultiplier modules equally suited to laboratory and development work and for specification in OEM equipment. Powered from 24V DC, these units allow full range control and monitoring of voltage and current via 0-10V analog signals.

If you do not have Acrobat Reader installed on your machine click here to download your copy.

E-mail: sales.us@HiTekp.com

^ Top